EVERYDAY OPERATIONS
For ...
Viewing Datapoints in Manual Mode
Setting Datapoints into Manual Mode
Changing Datapoint Values
see also
Viewing Datapoints in Alarm
EN2Z-1053GE51 R0119
... refer to the following sections and subsections
Datapoints – Viewing Datapoints in Manual Mode
Datapoints – Setting Datapoints into Manual Mode
Datapoints – Setting Datapoints into Manual Mode
Alarm List – Viewing Datapoints in Alarm
Purpose
Shows the list of datapoints which are currently in manual mode.
Procedure
1. In the HOME screen, turn the rotate&push button to navigate to and highlight
the General menu icon
2.
3. Then push the rotate&push button. The General menu is displayed.
4. Turn the rotate&push button to navigate to and highlight Points in Manual.
5. Push the rotate&push button.
All datapoints that are currently in manual mode are displayed. The manual
mode is indicated by the Manual command symbol
A datapoint can be set into automatic mode as described in the following.
6. To set a datapoint into automatic mode, turn the rotate&push button to
navigate to and highlight the datapoint.
EAGLEHAWK NX CONTROLLER
Viewing Datapoints in Manual Mode
.
48
... on page
48
49
49
44
.