Flycam FLCM-RK Assembly Manual
Redking handheld camera stabilizer
Hide thumbs
Also See for FLCM-RK:
- Instruction manual (14 pages) ,
- Instruction manual (15 pages) ,
- Assembly manual (9 pages)
Table of Contents
Advertisement
Quick Links
1
Redking Handheld Camera Stabilizer
(FLCM-RK)
A s s e m b l y M a n u a l
What's In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
Stabilizer Central Post
Base Weight Platform
16 Weights Plates
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright
statutes or in writing by the Publisher.
Advertisement
Table of Contents
Related Manuals for Flycam FLCM-RK
Summary of Contents for Flycam FLCM-RK
- Page 1 Redking Handheld Camera Stabilizer (FLCM-RK) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
- Page 2 Camera Plate Platform Base Camera Platform Dovetail Quick Release Plate Allen key with Extra knobs Screws 4 x Screws For Weight Platform 4 x Weight Closers & Rubber Washer Bag Packing...
-
Page 3: Table Of Contents
Camera Platform Mounting Camera Mounting Handle Adjustment Micro Balancing of Camera Head Plate Setup Adding Weight & Positioning For Proper Balance Balancing Your Stabilizer Horizontal Balancing Vertical Balancing 10-11 Holding Your Flycam Stabilizer Low Mode Operation Balancing Review Maintenance Final setup... -
Page 4: Features
FEATURES Dovetail Quick Release Plate Manfrotto 501 compatible Quick Camera Mounting/Dismounting Camera balance plate Tilts to maintain dynamic balance Laser Engraved Guide Scale Markings Quick & Precise adjustments Precision Three Axis Gimbal Collet lock system 3-Axis rotation control Foam Cushioned Handle Comfortable handheld operation No-Tools Telescopic Central Post Adjusts camera's vertical balance... -
Page 5: Functions
FUNCTIONS Peg Pin 3/8"-16 1/4"- 20 Dovetail Quick Release Knob Secures the Quick Release plate to base camera plate Push Pin Side to side adjustment Press to free Quick knob Release plate from Base Camera plate Right to left micro Scaling Adjustment knob Graduated reference scale... -
Page 6: Redking Handheld Camera Stabilizer Setup
Redking Handheld Camera Stabilizer Setup Base Weight Platform Mounting • Remove the cap from the middle of the base platform, and you will find a 1/4 thread located in the center, as shown in the image. Stabilizer Central Post Mounting •... -
Page 7: Counter Weight Plates Mounting
Counter Weight Plates Mounting • Insert the Counterweight plates by sliding them down the screws until they are rested on the base platform. • Secure the counterweight plates with the weight closer to prevent the weights from moving. NOTE: The number of Counterweights will vary depending on your camera weight. You can add the coun- terweights per your setup requirement. -
Page 8: Handle Adjustment
• Securely mount the camera on the dovetail plate. Then, slide in the dovetail plate on the camera base platform and tighten it with the side knob. • The Camera Mounting Platform comes with a beveled edge. Line up the beveled edge with your camera’s center of gravity mark found in Release the Dovetail Safety Pin when finished. -
Page 9: Adding Weight & Positioning For Proper Balance
Adding Weight & Positioning for Proper Balance • To make your Flycam Redking Video Stabilizer fully functional, you will note that the base platform has a provision to mount the balance weights via 2x BH... -
Page 10: Horizontal Balancing
• Now, your Flycam Redking Camera Stabilizer is set up and assembled. You can test and set up the system's horizontal balance. If the Stabilizer is horizontally balanced correctly, then the camera will... - Page 11 Now, your Stabilizer is horizontally balanced, its vertical axis can be tested and properly balanced. If the Stabilizer is vertically balanced correctly, then the camera will remain level, and the central post will remain vertical during operation unless you intentionally position the Stabilizer otherwise. If it is not balanced properly, then it will swing like a pendulum when you walk, run, or turn.
-
Page 12: Holding Your Flycam Stabilizer
Camcorder. We believe that better results are obtained when you attach the monitor to the Flycam Redking Stabilizer’s base. This way, you have to look slightly down to see the monitor, and your feet are more visible to your peripheral vision. This... -
Page 13: Balancing Review
• Remove the top plate of FLYCAM and line up your camera so that its center of gravity is as close to the center of the plate as possible (basically, hold the camera in your hand until it feels balanced both left-right and forward-back). -
Page 14: Maintenance
& clean up any overspill. Cleaning Do not use solvents or harsh cleaners of any kind on your Flycam Handheld stabilizer. If the unit becomes dirty, use a damp, soft cloth or sponge and a mild detergent to gently clean external parts. -
Page 15: Final Setup
YOUR FLYCAM REDKING HANDHELD CAMERA STABILIZER ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer a one-year warranty for our products from the date of purchase. Within this period, we will repair it without charge for labor or parts. The warranty doesn’t cover transportation costs, nor does it cover a product subjected to misuse or accidental damage.
Need help?
Do you have a question about the FLCM-RK and is the answer not in the manual?
Questions and answers