Table of Contents
Related Manuals for Envertech EVT1200
Summary of Contents for Envertech EVT1200
- Page 1 EVT1200 Zhejiang Envertech Corporation Ltd. Tel：+86 579 8926 6326 Web：www.envertec.com Email：info@envertec.com Add：24th Floor, Jintong Mansion, Center of Headquarters, Yongkang City, Zhejiang Province, China User Manual www.envertec.com...
-
Page 2: Table Of Contents
Content Important Safety Information................Read it First..................... Safety Instructions....................Envertech Microinverter System............How it Works................... Monitoring Device: EnverBridge.............. Optimal Reliability..................Simple Design..................Product Information................Overview....................Major Characteristics................Datasheet....................Packing checklist.................. Accessories..................... Product Description................. Further information.................. Planning of Microinverter Installation..........Symbols on Inverter................. -
Page 3: Important Safety Information
Please be kindly noted that the Envertech microinverter itself is a heat sink. Under normal operating To reduce the risk of electrical shock, and to ensure safe installation and operation of the microin- conditions, its temperature is 20°C above ambient, but under extreme conditions the microinverter... -
Page 4: How It Works
Microinverter systems are inherently more reliable than traditional inverters. The distributed nature Current monitoring in grounding of a microinverter system ensures that there is no single point failure in the PV system. Envertech Microinverters are designed to operate at full power at ambient temperatures as high as +65℃(150 DC current monitoring ℉). -
Page 5: Datasheet
Please go to Chapter 10 “Recycling and Disposal” for proper treatments. After you receive the Envertech microinverter, please check if there is any damage on the carton, and then check the inside completeness for any visible external damage on the microinverter and No unauthorized perforations or modi cations accessories. -
Page 6: Accessories
AC extension cable Installing Envertech microinverter system involves several key steps. Each step listed here is (AWG12 or above) elaborated on the following pages. Step 1: Mount microinverters onto the rack... - Page 7 PV Microinverter Insert the end cap directly into the connector on the unused end, and check if it is inserted Model£ º E VT1200 User Identification Number£ º Zhejiang Envertech Corporation Ltd. www.envertec.com in place. Step 2: Grounding Microinverters and modules must be connected to grounding conductor in accordance with national standards.
-
Page 8: Debugging And Operaing
Step 8：Prepare AC extension cable Ensure that all AC and DC wiring is correct. It is suggested to use extension cable of AWG12 above (same or higher than Envertech AC cable Ensure that none of the AC and DC wires is twisted or damaged. -
Page 9: Evt1200 Operation
Step 3: Click “Con rm” to nish adding the MI. The entire system will be detected within 10 minutes. 4）The voltage and frequency of EVT1200 can be adjusted on the site. If adjustments are Option 2. Use EnverPortal to bind MI Step 1: Login www.envertecportal.com with the newly-registered account, go to Settings--Management. -
Page 10: Troubleshooting And Maintenance
To troubleshoot an inoperable microinverter, follow the steps in the order shown below. If your problems are still unsolved with the steps above, please contact Envertech tech support WARNING：Be aware that only quali ed personnel should troubleshoot the PV array or the through www.envertec.com. -
Page 11: System Diagram
User Identification Number： Model：EVT1200 User Identification Number ： Model：EVT1200 User Identification Number ： Zhejiang Envertech Corporati o n L t d . www.envertec.com Zhejiang Envertech Corporati o n L t d . www.envertec.com Zhejiang Envertech Corporati o n L t d .