Samsung Galaxy S6 edge Instruction Manual page 442

Sending/Receiving data
1
Display a content to send on the
terminal/recipient device
2
Put
recipient device closer
• When the software license agreement is
displayed, follow the onscreen instructions
to start IC Tag/Barcode Reader use.
3
Tap a screen on the terminal/perform
sending operation on the recipient
device
• The content is sent/received.
• If the application selection screen
appears, select an application to use.
Information
• If you perform sending operations from the
terminal and the other device at the same
time, sending may fail.
• While the screen is locked, NFC tag
information cannot be sent/received.
• When NFC/Osaifu-Keitai Lock is set,
Android Beam cannot be used.
• For some applications, Android Beam is
unavailable.
• Actual communications are not guaranteed
for all devices equipped with Reader/Writer,
P2P.
marks of the terminal and the
440
Data communication