Samsung Galaxy S6 edge Instruction Manual page 358

Information
• Packet communication can also be
used even when Wi-Fi function is ON.
However, Wi-Fi will be used first during
Wi-Fi connection. If Wi-Fi network is
disconnected, network is automatically
switched to LTE/3G/GPRS. Be noticed
that packet communication charge is
applied if you keep using LTE/3G/GPRS
network after toggling.
• Setting docomo ID is required for using
docomo service via Wi-Fi. Set from the
Home screen,
service/cloud" → "docomo ID 設定 (docomo
ID setting)".
• Location information can be detected even
if Wi-Fi function is not ON. From the Home
screen,
"MORE" → "Always allow scanning" → "Scan
always".
→ "Settings" → "docomo
→ "Settings" → "Wi-Fi", tap
356
Settings