Samsung Galaxy S6 edge Instruction Manual page 363

■ Using static IP address
You can set the terminal to connect to Wi-Fi
network using the static IP address.
1
From the Home screen,
"Settings" → "Wi-Fi"
2
Tap Wi-Fi network to connect → Mark
"Show advanced options"
3
Tap "IP settings" → "Static"
4
Set required items
• For using static IP address, enter the
following items.
- IP address
- Gateway
- Network prefix length
- DNS 1/DNS 2
5
"CONNECT"
■ Using Wi-Fi Direct
You can exchange data by connecting Wi-Fi
Direct compatible devices.
1
From the Home screen,
"Settings" → "Wi-Fi"
2
"Wi-Fi Direct"
3
Tap a detected device name
• When the connection is accepted on
the searched device, the terminal will be
connected via Wi-Fi Direct and
on the status bar.
361
→
→
appears
Settings