Samsung Galaxy S6 edge Instruction Manual page 367

Information
• "WPA2 PSK" is set by default.
• While connected via Wi-Fi tethering, on
the Wi-Fi tethering screen, "MORE" →
"Configure hotspot" → Mark "Hide my
device" → Tap "Save" to disconnect
the connected wireless LAN device
temporarily, but it connects again
automatically.
• If "Hide my device" is marked, the terminal
cannot be scanned. When you connect
from the other device, confirm the
information displayed in "How to connect
from other devices" on the Wi-Fi tethering
screen, and then set the portable Wi-Fi
hotspot manually.
• When connected via Wi-Fi tethering, on
the Wi-Fi tethering screen, "MORE" → Tap
"WPS push button" to connect by pressing
WPS button on connected device. Also,
on the Wi-Fi tethering screen, "MORE" →
Tap "Timeout settings" to turn off Wi-Fi
tethering automatically when there is no
connected device for specified time.
365
Settings