Notes on holding over the device
Please note the following when holding the
terminal over an IC card reader or NFC module
equipped device.
• Bring the
not strike strongly.
• Hold the
center horizontally. If scanning is failed
even with it held in front of the center of the
scanner, slightly lift up the terminal, or move it
backwards/forwards or to the left/right.
• When there is a metal object between the
mark and the device, reading may fail.
Putting the terminal into a case or cover may
affect communication. In that case, remove
the case or cover.
mark
mark close to the device slowly,
mark over the device at the
259
Apps