LawnMaster CLGT2412 Operator's Manual page 19

OPERATION
AFTER USE
■ Switch the product off, remove the battery back and let it cool down.
■ Check, clean and store the product as described below.
GENERAL CLEANING
■ Clean the product with a dry cloth. Use a brush for areas that are hard to reach.
■ In particular clean the air vents (12) after every use with a cloth and brush.
■ Remove stubborn dust with high pressure air (max. 3 bar).
NOTE: Do not use chemical, alkaline, abrasive or other aggressive detergents
or disinfectants to clean this product as they might be harmful to its surfaces.
■ Check for worn or damaged parts. Replace worn parts as necessary or contact an aurhorised
service centre for repair before using the product again.
GUARD
■ Keep the guard clean and free of debris. Remove trimmings.
■ Replace the guard with a one of the same type when it's worn or shows damage.
CHARGER
■ If the power cord of the charger is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a safety hazard.
19