Download Print this page
Pepperl+Fuchs PVS58X Series Operating Instructions

Pepperl+Fuchs PVS58X Series Operating Instructions

Advertisement

Quick Links

Operating instructions
Safety recommendations for electrical apparatus to be used in hazardous areas
The rotary encoder of the series PVS58X, PVM58X, PSS58X und PSM58X is an electrico-mechanical apparatus that converts
rotational motion into electrical signals.
Information on the gas-hazardous and dust explosion-hazardous area:
Gas- and dust explosion protected zone 2 / zone 22 apparatus
Declaration of conformity
Conformity
Identification
General technical information:
Maximum rated operating voltage
Permissible ambient temperature
Maximum momentary rated speed
Degree of protection as per EN 60529
For P**58X-******0**-**** type
Shaft-side
Housing-side
For P**58X-******W**-**** type
Shaft-side
Housing-side
Maximum shaft load
For PVS58X, PVM58X type
Radial load
Axial load
For PSS58X, PSM58X type
Angle offset
Axial offset
Radial offset
Commissioning and installation
Information on hazardous areas and the manufacturer data sheets, as well as all laws or guidelines applying to use or planned
application are to be followed.
Standard 60079-14, in its valid version, is especially to be heeded.
The device is to be shielded from strong electro-magnetic fields and from mechanical damage.
The apparatus must be protected from excessive heat due to mechanical or electrical overloads.
Application areas in which ambient conditions may damage the sealing material NBR are to be checked and avoided where pos-
sible.
Refer to "General Notes Relating to Pepperl+Fuchs Product Information".
Pepperl+Fuchs Group
USA: +1 330 486 0001
www.pepperl-fuchs.com
fa-info@us.pepperl-fuchs.com
Series PVS58X, PVM58X, PSS58X, PSM58X
PF 19 CERT 5194 X
60079-0: 2012 +A11:2013,
EN 60079-15: 2010, ignition protection class "n"
EN 60079-31:2014, „protection by housing"
II 3G Ex nA IIB T4 Gc X
II 3D Ex tc IIIC T120°C Dc X
10 to 30 Volt
- 30°C to +55 °C
6 000 RPM
IP64 (without shaft seal)
IP65
IP66 (with shaft seal)
IP66
110 N
40 N
± 0,9°
static: ±0,3 mm, dynamic: ±0,1 mm
static: ±0,5 mm, dynamic: ±0,2 mm
Germany: +49 621 776 1111
Singapore: +65 6779 9091
fa-info@de.pepperl-fuchs.com
fa-info@sg.pepperl-fuchs.com
1

Advertisement

loading

Summary of Contents for Pepperl+Fuchs PVS58X Series

  • Page 1 The apparatus must be protected from excessive heat due to mechanical or electrical overloads. Application areas in which ambient conditions may damage the sealing material NBR are to be checked and avoided where pos- sible. Refer to "General Notes Relating to Pepperl+Fuchs Product Information". Pepperl+Fuchs Group USA: +1 330 486 0001...
  • Page 2 No changes may be made. Only the manufacturer may perform repair work. Refer to "General Notes Relating to Pepperl+Fuchs Product Information". Pepperl+Fuchs Group USA: +1 330 486 0001...

This manual is also suitable for:

Pvm58x seriesPss58x seriesPsm58x series