3Com IntelliJack NJ105 User Manual page 32

Installation Planning
WARNING: The NJ105 is designed to be
mounted using the provided mounting plate or
many after-market faceplates. However, some
after-market faceplates stand out from the wall
and do not provide a secure mounting surface
for the IntelliJack. In such cases, it is
recommended to place the 3Com spacer
between the IntelliJack and the after-market
face plate.
To ensure proper horizontal cabling functionality, adhere to the
following standards during installation:
ANSI/TIA/EIA-568
Commercial Building Telecommunications Cabling Standard
ANSI/TIA/EIA-569
Commercial Building Standard for Telecommunications
Pathways and Spaces
BRITISH STANDARD INSTITUTE (BSI): BS 4664:1970
The network cabling at your site (from the wiring closet to the
wall or cubicle opening) may already be installed. If it is not,
install the cabling following these general guidelines.
CAUTION: It is recommended that a professional
cable installer perform these procedures. Be sure to
adhere to local safety and regulatory codes during
the cable installation.
28