Installing Expansion Memory - 3Com CoreBuilder 9000 Quick Start Manual

8 Enterprise Management Engine Quick Start Guide
Installing Expansion
Memory
Follow these steps to install the expansion memory card:
1 Locate the expansion memory card slot on the EME module printed
circuit board. See Figure 2.
2 Remove the expansion memory card from its antistatic bag.
CAUTION: To avoid damage due to static discharge, handle the EME
module by the front panel or edges only.
3 Insert the memory card into the expansion memory card slot on the EME
module. Press the memory card in place so that it is firmly seated.
The memory card is keyed to ensure that you insert it correctly.
Figure 2 The Expansion Memory Card Slot
EME
front
panel
Expansion memory card slot