Installation Prerequisites - 3Com CoreBuilder 9000 Quick Start Manual

Installation Before you install the EME module, comply with the following
prerequisites:
Prerequisites
Verify that the chassis is properly installed in a rack, on a table, or on a
shelf, according to the instructions in either of these guides:
Have a flat-blade torque screwdriver available to secure the module to
the chassis after you install it.
Read the CoreBuilder 9000 Release Notes for Management Modules
that is included in your module shipping box for important upgrade
procedures for other modules in an existing chassis or in a new
chassis.
CAUTION: All modules in a CoreBuilder 9000 chassis must operate at
compatible software levels. You must verify the software release on all
new and existing modules in your chassis and upgrade as necessary. See
the CoreBuilder 9000 Release Notes for Management Modules for a
module software compatibility requirements table, mandatory upgrade
procedures, and other important information.
Enterprise Management Engine Quick Start Guide
7-Slot Chassis Quick Installation Guide for the CoreBuilder 9000
Enterprise Switch
Chassis Quick Installation Guide for the CoreBuilder 9000
Enterprise Switch 8-slot Chassis and 16-slot Chassis
7