Pause Timer; Pbx Dial Codes; Phone Box - LG GHX-308A/616 Installation And Programming Manual

GHX-308A/616
HYBRID KEY TELEPHONE SYSTEM
2. To activate External Page, MFU should be installed.

PAUSE TIMER

Description
When dialing a speed number, a timed pause in digit sending can be placed in the number. The length of this pause
can be programmed in the system database.
Programming
1. Flash 05 : Pause Timer
Related Feature
1. Station/System Speed Dial
Conditions
1. When the HOLD button is pressed as an entry into a speed dial bin, it serves as a command
to the system to provide a timed pause before resuming digit sending.
2. Successive entries of the HOLD will provide successive timed pause.
3. Each programmed pause utilizes one of the spaces for speed dialing digit.

PBX DIAL CODES

Description
The system will allow 5 one- or two-digit access codes to be entered into memory. When one of these codes is dialed,
the signals the KSU that toll restriction is to be applied at the next dialed digits after the code. If one of these codes is
not dialed, toll restriction does not apply. This allows the dialing of PBX extensions 100. 101, 107, etc. The line must
be marked as PBX type and toll restriction must be enabled.
Programming
1. Flash 30, Page A, Button 7 : CO/PBX
2. Flash 17 : PBX Access Codes
Conditions
1. In CO line programming, the line must be marked as PBX type and toll restriction must be enabled.

PHONE BOX

Description
A convenient phone box for receiving announcements, intercom call and signaling can be connected the system.
Stations programmed to receive alarm signal (Program Code: Flash 40) will receive a call from a phone box, and can
answer the call by dialing phone box number.
Stations with a flexible button programmed as DSS of a phone box can answer a call from the phone box by pressing
the flashing DSS button.
To call a phone box, stations can use either the dial pad or the DSS button.
Programming
1. Flash 21 : Phone box call signal select
2. Flash 25 : Phone box Call Timer
3. Flash 40, Page A, Button 8 : Phone box Call Signal Receive Yes/No
4. Flash 40, Page B, Button 1 : Station ID
Conditions
1. If a phone box originated call is not answered within programmed period, the associated
DSS button at all key stations will extinguish and the LED of the call button will extinguish, too.
Http://suryawardana.com
51