Slt Ring Off Time (Flash 79) (Ghx-308A); Disa Busy/No/Error Dest (Flash 79) ( Ghx-616 ) - LG GHX-308A/616 Installation And Programming Manual

GHX-308A/616
HYBRID KEY TELEPHONE SYSTEM
Process :
- Same as day DISA mode.
- Send error tone and drop the line.
- To transfer pre-selected station or hunt group.
Default: Same as day DISA mode
Procedure:
1. Press FLASH button and dial 78.
2. On a display phone, you will see this display:
DISA NIGHT ACT : DIAL
1DIAL-NUM 2TONE 3PRE-SEL
3. To change night mode DISA process, dial 1 digit (1-3).
1 : Same process for day DISA mode. (DISA line can dial station number)
2 : Send night DISA message and error tone then drop the line.
3 : Send night DISA message and transfer to pre-selected station.
When you select
4. Press HOLD button.

SLT RING OFF TIME (FLASH 79) (GHX-308A)

This field determines SLT ring off time.
Range : 3-4 sec
Default : 4 sec
Procedure :
1. Press FLASH button and dial 79.
2. On a display phone, you wil see this display ;
SLT RING OFF TIME
4
3. To change SLT ring off time, pres top left button and HOLD button.

DISA BUSY/NO/ERROR DEST (FLASH 79) ( GHX-616 )

DISA call is differently processed on below state. The process of each state is changed by Admin program.
Parameters:
DISA line can be one of following states.
1. Called station is in Busy.
2. DISA line dialed Invalid digits.
3. Called station does not answer.
4. DISA line dial is late.
5.
DISA line drop the line without dial while hearing DISA-Day or Night Message. And CPT detects
error tone from the PX line.
Each DISA state can be handled by one of three methods.
1. Send error tone to DISA CO and drop.
2. Transfer to attendant.
3. Retry.
Default:
Call to busy STA or CO.
Input digit is invalid.
Called party does not answer. - ATTD : Transfer to attendant
Dial is late.
Http://suryawardana.com
- Retry
- Retry
- Give error tone to CO line and drop the line.
106