Table of Contents
Advertisement
Image Shape
c
Select the Installation menu and press [Enter].
Select Geometry Correction and press [Enter].
d
e
Select Quick Corner and press [Enter]. Then press [Enter] again if
necessary.
You see the area selection screen.
f
Use the arrow buttons to select the area of the image you want to
adjust. Then press [Enter].
To reset the Quick Corner corrections, hold down [Esc] for
about 2 seconds while the area selection screen is displayed, and
then select Yes.
a
g
Press the arrow buttons to adjust the image shape as necessary.
To return to the area selection screen, press [Enter].
54
Advertisement
Table of Contents
