Table of Contents
Advertisement
Projector Connections
a
Make sure your computer is connected to the projector's Computer
port.
• If there are two computer ports, make sure you use the
Computer1 port.
a
• Only analog RGB signals from the Computer1 port can be
output to an external monitor. You cannot output signals
input from other ports.
b
Connect the external monitor's cable to your projector's Monitor Out
port.
Connecting to External Speakers
To enhance the sound from your presentation, you can connect the projector
to external self-powered speakers. You can control the volume using the
projector's remote control.
To output audio from external speakers, set the Audio Out Device setting to
AV System in the projector's Signal I/O menu. When an audio/video system
is not connected to the projector, audio is output from the projector even if
Audio Out Device is set to AV System.
Signal I/O > HDMI Link > Audio Out Device
s
• If you want to output audio from the external speakers when the
projector does not project any images, set the A/V Output setting to
Always On in the projector's Signal I/O menu.
a
• You can also connect the projector to an amplifier with speakers.
• The projector's built-in speaker system is disabled when you connect
external speakers.
a
Make sure your computer or video source is connected to the projector
with both audio and video cables as necessary.
b
Locate the appropriate cable to connect your external speakers, such as
a stereo mini-jack-to-pin-jack cable, or another type of cable or adapter.
c
Connect one end of the cable to your external speakers as necessary.
d
Connect the stereo mini-jack end of the cable to your projector's Audio
Out port.
Connecting a Microphone
You can connect a microphone to the projector's Mic port to provide audio
support during presentations (EB‑L200F/EB‑L200W/EB‑L200X).
30
Advertisement
Table of Contents
