Batch Setup Error Notification - Epson EB‑L255F User Manual

Copying Menu Settings Between Projectors (Batch Setup)
The computer recognizes the projector as a removable disk.
l Copy the batch setup file (PJCONFDATA.bin) that you saved to your
computer to the top level folder of the removable disk.
Do not copy any files or folders other than the batch setup file to
the removable disk.
a
m Eject the USB device (Windows) or drag the removable disk icon to the
Trash (Mac).
n Disconnect the USB cable.
When all of the indicators start flashing, the settings are being written.
When writing is finished, the projector turns off.
Caution
Do not disconnect the power cord from the projector while the file is being
written. If the power cord is disconnected, the projector may not start
correctly.
g g Related Links
• "Batch Setup Error Notification"

Batch Setup Error Notification

The projector's indicators notify you if an error occurs during a batch setup
operation. Check the status of the projector's indicators and follow the
instructions described in the table here.
Indicator status Problem and solutions
The batch setup file may be corrupt, or the USB flash
• Laser: Orange - flashing
drive may not be connected correctly.
fast
Disconnect the USB flash drive, unplug and then plug
• Temp: Orange - flashing
in the projector's power cord, and then try again.
fast
p.194
Indicator status Problem and solutions
Writing the settings may have failed and an error may
• Power: Blue - flashing
have occurred in the projector's firmware.
fast
Stop using the projector, remove the power plug from
• Status: Blue - flashing
the electrical outlet. Contact Epson for help.
fast
• Laser: Orange - flashing
fast
• Temp: Orange - flashing
fast
194