Table of Contents
Advertisement
Using Multiple Projectors
You see a screen like this:
e
Select the Blending setting and select On.
f
Select the Blend Start Position setting and adjust the blending start
position
g
Select the Blend Range setting and use the arrow buttons to select the
width of the blended area so that the displayed guides are at the edges
of the overlapping area between the two images.
h
Press [Esc] to return to the previous screen.
i
Select the Blend Curve setting and select a gradient for the shaded area
on the projectors.
j
When the edges are blended, turn off the Line Guide and Pattern
Guide settings on each projector to check the final settings.
k
When you are finished, press [Menu].
If the blended area does not overlap exactly, correct the shape of the
blended area using Point Correction.
a
Matching the Image Colors
You can match the display quality of multiple projectors that will project next
to each other (EB‑L255F/EB‑L250F).
Before you begin, turn on all the projectors so you can select image quality
settings that match on the unified screen.
109
Advertisement
Table of Contents
