Epson EB‑L255F User Manual page 207

Projector Indicator Status
Indicator and status Problem and solutions
Power: Off Projector has overheated and turned off. Leave it turned
off to cool down for 5 minutes.
Status: Flashing blue
• Make sure that the vents and air filter are not clogged
Laser: Off
with dust or obstructed by nearby objects.
Temp: Lit orange
• Make sure the environmental temperature is not too
hot.
• Clean or replace the air filter.
• If operating the projector at high altitude, set the High
Altitude Mode setting to On in the projector's
Installation menu.
• If the problem persists, unplug the projector and
contact Epson for help.
Power: Flashing blue Laser warning.
Status: Indicator status Turn the projector off, unplug it, and contact Epson for
varies help.
Laser: Flashing orange
Temp: Indicator status
varies
Power: Off Laser has a problem.
Status: Flashing blue Turn the projector off, unplug it, and contact Epson for
help.
Laser: Lit orange
Temp: Off
Power: Off A fan or sensor has a problem.
Status: Flashing blue Turn the projector off, unplug it, and contact Epson for
help.
Laser: Off
Temp: Flashing orange
Power: Off Internal projector error.
Status: Flashing blue Turn the projector off, unplug it, and contact Epson for
help.
Laser: Flashing orange
Temp: Off
Wireless LAN status
Wireless LAN indicator Problem and solutions
status
Lit blue Wireless LAN is available.
Flashing blue (quickly) Connecting to a device.
Flashing blue (slowly) An error has occurred. Turn off the projector and then
on again.
Off Wireless LAN is not available. Make sure the Wireless
LAN Power setting is set to On in the projector's
Management menu.
g g Related Links
• "Projector Administration Settings - Management Menu"
• "Cleaning the Air Filter and Vents"
• "Replacing the Air Filter" p.199
p.178
p.199
207