Table of Contents
Advertisement
Wired Network Projection
h
Select the Network Projection menu and press [Enter].
i
Turn on the Projector Keyword setting if you want to prevent access to
the projector by anyone not in the room with it.
When you turn on this setting, you must enter a displayed,
randomized keyword from a computer using Epson iProjection
to access the projector and share the current screen.
a
j
Set the Epson iProjection setting to On.
k
Select the options as necessary.
• Display LAN Info. lets you set the display format for the projector's
network information.
• Moderator Password lets you enter a four-digit number password
for accessing the projector as a moderator using Epson iProjection.
(No password is set by default.)
• Keyword Interrupt Display lets you select whether to display a
projector keyword on the projected image when accessing the
projector using Epson iProjection.
l
When you finish selecting settings, go back to the Network Settings
screen, select Set, and follow the on-screen instructions to save your
settings and exit the menus.
m
Press the [LAN] button on the remote control.
The wired network settings complete when you see the correct IP
address on the network information screen.
g g Related Links
• "Using the Displayed Keyboard"
p.167
125
Advertisement
Table of Contents
