45 Ft (13.7 M) Tower Kit; Marine Tower Kit - Primus Wind Power AIR 40 Owner's Manual

AIR WIND TURBINE TOWERS

45 ft (13.7 m) Tower Kit

The 45 ft (13.7 m) Tower Kit includes tower clamp/guy wire assemblies
and all necessary hardware and fasteners to erect a 45 ft tilt-up tower
using Schedule 40 steel pipe or tubing with an outside diameter
of 1.875 inch. See Fig. 5.
Note: Anchors and pipe or tubing are not furnished.
Fig. 5. 45 ft (13.7 m) Tower Kit
:
IMPORTANT
User manuals for towers and tower kits are available
online at www.primuswindpower.com. Primus Wind Power recom-
mends reviewing user manuals prior to purchase to make an appro-
priate tower selection for your AIR wind turbine.
AIR 40, AIR Breeze, AIR 30, AIR X MARINE and AIR SILENT-X are trademarks of Primus Wind Power 2013 Primus Wind Power Inc.
(continued)

MARINE TOWER KIT

The Marine Tower Kit is specifically designed to aid mounting
the turbine on a boat deck. Kit includes powder coated alumi-
num mast and stays, vibration damping mounts and all neces-
sary marine grade hardware to install the kit. See Fig. 6.
Marine towers components are sold in two kits:
1) Marine grade Pole and Mast Set /Stay Kit
2) Marine grade hardware and mounting brackets (SS)
Fig. 6. Marine Tower Kit
AIR Owner's Manual
17
3-CMLT-2020-A