Important Safety Instructions - Primus Wind Power AIR 40 Owner's Manual

IMPORTANT SAFETY AND STORAGE INSTRUCTIONS
Read these instructions in their entirety before installing or operating.
SAVE THESE INSTRUCTIONS. Enclosed are important instructions that
must be followed during installation and maintenance.
Turn AIR "OFF" and contact Primus Wind Power Customer Service
Department if unusual noise or operation is observed.
Install AIR on a calm day - no wind at ground level
IN THIS MANUAL
IMPORTANT: Please take note
TIP: Helpful information
WARNING: Risk of injury or death - proceed with extreme
caution
MARINE: Information specific to corrosive environments
Information specific to AIR 30
AIR X Marine and AIR Silent-X
AIR 40, AIR Breeze, AIR 30, AIR X MARINE and AIR SILENT-X are trademarks of Primus Wind Power 2013 Primus Wind Power Inc.
.
(ONLY)
Apply Tef-Gel using applicator provided in the hardware kit to all
bolts for both land and marine units. Properly torque all fasteners.
Use grounding techniques as established by the NEC. Install
turbine in accordance with this manual and local and national
building codes. Failure to comply may affect and possibly void your
warranty.
Properly complete the Warranty Registration Card or register
your product online at www.primuswindpower.com/warranty.
Rotating blades are a serious mechanical hazard. Install AIR
wind turbines so no one can come into contact with blades.
Observe wire size and fuse recommendations listed in the
.
Wiring Section of this manual
Install overcurrent protection in accordance with CEC and NEC
IMPORTANT: Follow proper storage instructions of your AIR
wind turbine to limit any damage and or water ingress when
removing front hub/blades for seasonal storage and or when
transporting between projects.
AIR Owner's Manual
4
3-CMLT-2020-A