Introduction To The Ez Tower - Primus Wind Power EZ Tower Owner's Manual

INTRODUCTION TO THE EZ TOWER

TM
Congratulations! You have just received the simplest, and most
economical EZ Tower™ available for your AIR™ turbine. This kit
is designed to be easy to assemble and erect.
The EZ Tower™ is designed specifically for Primus Wind Power, Inc.
AIR family of small wind turbines. This guy-wire supported tower uses
lightweight tubing while providing plenty of strength. Two people can
easily erect this tower in about an hour. Because the wind turbine and
EZ Tower™ are lightweight, no winches or vehicles are needed to erect
the tower. The EZ Tower™ includes a simple yet effective tower base and
anchoring system.
The EZ Tower™ includes a simple yet effective tower base and anchoring
system, which eliminates the need for a concrete pad. Depending on your
soil conditions, cement may be necessary for proper anchoring. It is
important to read this manual first and understand your soil conditions
before you begin construction. Read this manual thoroughly before
beginning assembly.
Read this manual thoroughly before beginning assembly. Primus Wind
Power, Inc. assumes no responsibility for inaccuracies or omissions. The
user of this information and product assumes full responsibility and risk. All
specifications are subject to change without notice.
If you have any questions on siting, proper installation or operation, please
contact Primus Wind Power, Inc. or your dealer before installation.
EZ Tower Owner's Manual, Rev A 7
TM