FIBARO RGBW CONTROLLER 2 Operating Manual page 18

18
10.2: Advanced parameters
The device allows to customize its operation to user's needs using
configurable parameters.
The settings can be adjusted via Z-Wave controller to which the de-
vice is added. The way of adjusting them might differ depending on
the controller.
In the FIBARO interface parameters are presented as simple options
in Advanced Settings of the device.
Available parameters:
confIguratIon
1. Remember device status before the power failure
This parameter determines how the device will react in the event
of power supply failure (e.g. power outage or taking out from the
After the power supply is back on, the device can be restored to
previous state or remain switched off.
Parameter size 1B
Default value
Available
values
20.
This parameter allows to choose mode of 1st input (IN1). Change it
depending on connected device.
Parameter size 1B
Default value
Available
values
electrical outlet).
1
0 - device remains switched off
1 - device restores the state from
before the power failure
Input 1 - operating mode
2 (monostable button)
0 – Analog input without inter-
nal pull-up (Sensor Multilevel)
1 – Analog input with internal pull-
up (Sensor Multilevel)
2 – Monostable button (Central Scene)
3 – Bistable button (Central Scene)
4 – Bistable button with memory (Central Scene)