54
C
5: S
HAPTER
OFTWARE
Maintaining
Application Program
and Configuration
Through Command
Lines
Maintaining the Router
with TFTP Server
M
AINTENANCE
Enter the file control submenu and enter <2> to set the application file type.
Please set application file type in cf:
M=MAIN
********************************************************************
NO.
Size(B)
0
15561860
********************************************************************
Enter File Name:cf:/main.bin
Select the application program as the main boot file, and enter its complete path
and file name.
Modify this file Attribute:
1.
2.
3.
4.
5.
Enter your choice(1-5):1
Enter "1" to set the selected application program to be the main boot file, i.e. the
default boot file of the system.
Step 6: Enter <5> to exit to the main BootROM menu. Enter <1> to boot from the
CF card.
c
CAUTION:
The file in the CF card will be overwritten if the file name being input is the
■
same with the original file name in the CF card.
Make sure the space on memory is sufficient. Or, the system prompts
■
insufficient space:
Updating File main.bin
Insufficient CF Card space or failed device writing operation
The file updated will directly replace the original file of this type to become the
■
only application program. The main.bin file downloaded here will replace the
original M file directly to become the main boot program.
Refer to "Files" on page 41 for detailed descriptions of file types.
■
After booting the router normally, you can upgrade and backup application
program and backup and recover configurations under command line mode.
The TFTP service provided by the router is TFTP Client - the router serves as TFTP
Client, and the file server serves as TFTP Server. You can input commands to
upload the configuration file and application program of the router to the file
server, or download configuration file or application program to the router from
the file server.
B=BACKUP
S=SECURE
Time
Jul-10-2006 14:14
+Main
-Main
+Backup
-Backup
Exit
N=NOTYPE
Type
Name
N
cf:/main.bin