Bootrom Submenus - H3C MSR 20-20 User Manual

BootROM Submenus

Table 16 Main BootROM menu
Menu item
<1> Boot From CF Card
<2> Enter Serial SubMenu
<3> Enter Ethernet SubMenu
<4> File Control
<5> Modify Bootrom Password
<6> Ignore System Configuration
<7> Boot Rom Operation Menu
<8> Clear Super Password
<9> Device Operation
<a> Reboot
Enter serial submenu
This submenu can be used for upgrading application program, changing serial
baud rate, and other operations.
Enter <2> under the main BootROM menu to enter the serial submenu:
======================<SERIAL SUB-MENU>======================
|Note:the operating device is CF Card
| <1> Download Application Program To SDRAM And Run
| <2> Update Main Application File
| <3> Update Backup Application File
| <4> Update Secure Application File
| <5> Modify Serial Interface Parameter
| <6> Exit To Main Menu
=============================================================
Enter your choice(1-6):
The menu is defined as follows:
Table 17 BootROM serial submenu
Menu item
<1> Download Application Program To
SDRAM And Run
<2> Update Main Application File
<3> Update Backup Application File
<4> Update Secure Application File
<5> Modify Serial Interface Parameter
<6> Exit To Main Menu
Description
Boot from the CF card.
Enter serial submenu. Refer to "Enter serial submenu"
on page 41 for details.
Enter Ethernet submenu. Refer to "Enter Ethernet
interface submenu" on page 42 for details.
File control submenu. Refer to "File control submenu"
on page 42 for details.
Modify BootROM password.
Ignore system configuration.
BootROM operation submenu. Refer to "BootROM
operation submenu" on page 43 for details.
Delete super password.
Device Operation menu, which is used to select
memory device.
Reboot the router.
Description
Download the application program to SDRAM and
run it.
Upgrade the main application file.
Upgrade the backup application file.
Upgrade the secure application file.
Modify serial interface parameter.
Exit to the main menu.
BootROM Menu 41
|
|
|
|
|
|
|