Accessories - Graco B Series Instructions-Parts List Manual

USE ONLY
Displacement Pump Repair Kit
See contents on page 32. Repair instructions are
included with the kit.
Air And Material Hose Kit
Fluid: 750 psi (5.18 MPa, 51.7 bar)
Max. Working Pressure
Air: 300 psi (2.07 MPa, 20.7 bar)
Max. Working Pressure
50 ft (15.2 m) hoses to supplement the 50 ft (15.2 m)
hose kit supplied with the sprayer. Use up to three
more hose kits. DO NOT use this kit at the sprayer
outlet as it does not have a spring guard on the mate-
rial hose.
GM3012 High Pressure Displacement Pump,
Pressure Control, And Filter Kit
3000 psi (21.0 MPa, 210 bar)
Maximum Working Pressure
Up to 1.2 gpm
Quickly convert the GM1030 TexSpray sprayer to an
airless sprayer to spray primer, sealer, smooth elasto-
merics as well as architectural paints, acrylics, ure-
thanes and bonding adhesives at up to 1.25 gpm (4.75
lpm) with 0.035 inch maximum size spray tip at 3000
psi (21.0 MPa, 210 bar) Maximum Working Pressure.
This accessory includes a high pressure pump, fluid
filter, optional filter screen, drain valve and pressure
control.
The system requires an airless spray gun and tip
guard and an airless spray hose with spring guards on
both ends. These accessories must be rated for at
least 3000 psi (21.0 MPa, 210 bar) working pressure.
34 308269

Accessories

GENUINE GRACO
PARTS AND ACCESSORIES
235186 2 Gpm Displacement Pump
1000 psi (7.0 MPa, 70 bar)
Maximum Working Pressure
235739
This accessory kit directly replaces the standard
TexSpray 3 gpm pump. Use it when spraying smooth
and fine textures where lower volume is important for
better control. Operates in the 1/4 to 2 gpm range
(Not shown.)
High Pressure Spray Hoses
3000 psi (21.0 MPa, 210 bar)
Maximum Working Pressure
214705
224524
223541
214701
Adapters
157705
150287
156173
Optional Flow Restrictor
This accessory (E) restricts the flow of fluid to the gun
when using thin materials. Install as shown in Fig. 3.
Air Cylinder Repair Kit
This repair kit includes wear parts for the air cylinder.
TI0307A
3/8" ID, cpld 3/8 npt(m); 50 ft (15 m),
spring guards both ends
1/4" ID, cpld 1/4 npsm(f); 50 ft (15 m),
spring guards both ends
1/4" ID, cpld 1/4 npsm(f); 3 ft (0.9 m),
spring guards both ends
Union, 1/4 npt(m) x 3/8 npsm(f)
Adapter, 1/4 npt(m) x 3/8 npt(f)
Union, 3/8 npt(f) x 3/8 npsm(f)
235965
190109
244111