1. Manuals
  2. Brands
  3. Graco Manuals
  4. Paint Sprayer
  5. Series B
  6. Instructions-parts list manual

Graco B Series Instructions-Parts List Manual

Silver circulating airless spray gun
Hide thumbs Also See for B Series:
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTIONS-PARTS LIST
Silver Circulating
Airless Spray Gun
5000 psi (345 bar) Maximum Working Pressure
Model 235465, Series B
Includes the Standard (non-reversing) DripLesst
Tip Guard and 2 finger trigger.
Spray tip not included; order separately.
II 2 G
Patents Pending
INDEX
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440-1441
This manual contains important
warnings and information.
READ AND RETAIN FOR REFERENCE
2
4
4
. . . . . . . .
4
4
. . . . . . . . . . .
5
. . . . . . . .
5
6
7
9
11
12
12
12
ECOPYRIGHT 1992, GRACO INC.
308237
Rev
Supersedes B and PCN E
01482
E

Advertisement

Table of Contents
loading

Related Manuals for Graco B Series

Summary of Contents for Graco B Series

  • Page 1: Table Of Contents

    ....... . GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441...

  • Page 2: Warnings

    WARNINGS High Pressure Spray Can Cause Serious Injury. For Professional Use Only. Observe All Warnings. Read and understand all instruction manuals before operating equipment. FLUID INJECTION HAZARD General Safety Spray Tip Safety This equipment generates very high fluid pressure. Spray from Use extreme caution when cleaning or changing spray tips.
  • Page 3 DO NOT expose Graco hoses to temperatures above F (82 C) or below –40 F (–40...

  • Page 4: Installation/Operation

    Additional cards are available at no charge from Graco Inc. 2. With no tip installed, start the pump. Flush the pump according to the instructions supplied with it. Prime the system with the fluid.

  • Page 5: How To Adjust The Spray Pattern

    How to Adjust the Spray Pattern. How to Clean the Spray Tip and Clear a Spray Tip Obstruction. 1. Follow the Pressure Relief Procedure on page 2. WARNING Loosen the retaining nut (B). Turn the tip guard so To reduce the risk of fluid injection or splashing in the groove in the tip is horizontal (C) for a hori- the eyes or on the skin, do not hold a hand, body zontal pattern and vertical (A) for a vertical pattern.

  • Page 6: How To Flush The Gun

    Installation/Operation If using the accessory RAC IV tip guard NOTE: If it is available, the flushing procedure provided in your pump or sprayer manual should be used instead of this procedure. 1. Engage the trigger safety latch. Rotate the RAC IV tip handle 180 .

  • Page 7: Service

    CAUTION Do not attempt to install an old style needle in this gun. The front of the new needle is marked with a + below the Graco symbol. Notes: Use Needle Kit 235475. Use all the new parts for the best results. Parts included in the kit are shown with one asterisk, (2a*).
  • Page 8 9. Grease the diffuser/seat threads. Place the new gasket (2b*) on the diffuser/seat (2a*) and screw the assembly into the fluid housing (6). Torque to 20–25 ft-lb (27–34 N.m). See Fig. 5. 10. Install the trigger (8), pivot pin (10) and screw (12). See Fig.

  • Page 9: Parts

    Parts Lubricate, then torque to 20-25 ft-lb (27-34 N.m) Lubricate Torque to 30-40 in-lb (3.4–4.5 N.m) 01487 Purchase separately Model 235465, Series B Includes items 1 to 16 Part No. Description Qty. Part No. Description Qty. 220222 STANDARD TIP GUARD 188128 HEAT SHIELD 235475...
  • Page 10 Notes 308237...

  • Page 11: Accessories

    TIP GUARDS 3 ft (0.9 m) whip hose for more flexible gun movement. These tip guards fit all Graco airless spray guns. Choose the one that’s right for your application. One of Mounts between hose and gun these tip guards is included with every Graco airless gun.

  • Page 12: Technical Data

    0.037 in. (0.94 mm) Wetted Parts ..Stainless steel, Polyethylene, TO PLACE AN ORDER, contact your Graco distrib- Polyurethane, Nylon, PTFE utor, or call this number to identify the distributor Maximum Fluid Temperature .

  • Page 13: Warranty

    Graco distributor to the original purchaser for use. As purchaser’s sole remedy for breach of this warranty, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment proven defec- tive.

This manual is also suitable for:

235465

Table of Contents