Table of Contents
Advertisement
Trouble shooting
PROBLÈME
Material is not cut.
Warning! In the event of an accident or any type of malfunction, first stop the appliance and
disconnect it from the mains. Always make sure that the moving parts are completely station-
ary. Only then check the unit or call thr customer service.
Operating Instructions
1. Hopper
2. Main body
3. Rear body
4. Collecting container
5. Rack
6. Wheels
7. Foot
8. On/off switch
9. Reset-switch (motor pro-
tection)
10. Hand screw
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
CAUSE
Motor
protection
has
triggered.
Materials jamming
The engine does not start.
The filling device is clogged.
Item 61075
SOLUTION
been
Remove all chaff pieces and press
reset switch.
Remove all chaff pieces from the
knives.
Check that the power cord, con-
nector, fuse and latch are in proper
condition.
Pull the branches out of the filling
suction opening. Alternatively, use
a rod to push or loosen the
branches inside the machine.
Page 12
12 2020-1
Advertisement
Table of Contents
