WilTec DBHC001 Operation Manual page 9

Electric garden shredder
Table of Contents

Advertisement

WARNING: This machine has rotating blades! The cutting knives will not stop immedi-
ately after the machine has been switched off.
Switch off the shredder, remove the plug from the socket and wait until the cutter blade has
come to a complete stop before carrying out any maintenance or cleaning work.
It is forbidden to remove or modify electrical or mechanical safety devices.
Use the shredder only in daylight or good artificial light.
If you notice any unusual vibrations in the shredder, switch off the engine immediately and
check the cause of the problem. Vibrations are generally a sign of malfunction.
The chopper must be carefully inspected before use! Check that the cutter blade is firmly
seated before using the shredder.
The implement may only be operated with the cutter blade properly inserted. Only work with
implements that are in a proper condition. If you discover any damage or fault on the imple -
ment which could be a danger to the user, the implement may only be used again after it has
been repaired.
For safety reasons, worn or damaged parts must be replaced immediately. Only use original
spare parts. The use of non-original spare parts can lead to malfunctions and injuries and
voids the warranty!
Use the shredder only in places where it is protected from water. The machine must not be ex-
posed to rain!
Always keep the shredder in a dry and safe place out of the reach of children. This equipment
must not be used by children! Children should also be supervised so that they cannot play
with the appliance. Likewise, maintenance and cleaning must not be carried out by children.
This device must not be used by persons with reduced physical, sensory or mental abilities or
lack of experience and knowledge. Local regulations may limit the age of the user.
Familiarize yourself with the adjustable parts and proper use of the machine.
Preparation
Do not allow children to work with this device.
Always wear ear protection and safety glasses during operation.
Avoid clothing with a loose fit or hanging straps or bands.
Only use the machine with enough free space around it (e. g. not near a wall or other solid ob-
jects) and on firm, level ground. Do not operate the machine on paved ground or gravel where
ejected parts can cause injury.
Before switching on the machine, all screws, nuts, bolts or other fixing agents must be
checked for secure seating, as must the presence of protective and shielding devices. Re-
place damaged and illegible stickers.
Always wear sturdy shoes and long trousers when operating the machine. Do not operate the
machine barefoot or in light sandals. Avoid wearing loose clothing or clothing with hanging
cords or ties.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 61075
Page 9
12 2020-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

61075

Table of Contents