Table of Contents
Advertisement
sure that they are connected and used properly. The use of such a device can reduce the risk
of dust.
Power tool use and handling
Do not overload the device. Only use a suitable device for your work. With the appropriate
•
device you will work better and safer in the specified power range.
Do not use a device whose switch is defective. A device that can no longer be switched on or
•
off is dangerous and must be repaired.
Disconnect the power plug from the wall outlet and/or remove the battery before making any
•
device adjustments, changing any accessories or putting the device away. This precaution
prevents the unit from accidentally starting.
Always keep unused equipment out of the reach of children. Do not allow persons who are not
•
familiar with this equipment or who have not read these instructions to use it. Electrically oper-
ated equipment is dangerous if used by inexperienced persons.
Maintain the unit regularly and take good care of it. Check that the moving parts are function-
•
ing properly and are not jammed, that parts are broken or damaged in such a way as to affect
the operation of the unit. Have all damaged components repaired before using the unit. Many
accidents are caused by poorly maintained equipment.
Keep the cutting tools (inserts) sharp and clean. Carefully maintained cutting tools with sharp
•
cutting edges jam less and are easier to guide.
Use the device, accessories, inserts, etc. according to these instructions. Take into account
•
the working conditions and the activity to be performed. The use of electrically powered equip -
ment for applications other than those for which it is intended can lead to dangerous situ -
ations.
Service
Have your device repaired only by a qualified specialist company with original spare parts. This en-
sures that the safety of the device remains guaranteed.
Special safety instructions for the garden shredder
Protective gloves, goggles and ear protection must always be worn. Do not wear loose cloth-
•
ing!
Always stand safely and in balance. Do not stretch towards the machine.
•
During operation, the machine must stand on a straight and stable surface. Make sure that all
•
bolts and nuts have been tightened before use.
The machine may only be used in dry conditions and never in rainy weather outdoors.
•
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 61075
Page 7
12 2020-1
Advertisement
Table of Contents
