Performance Charts - Graco E-Flo EC1110 Instructions-Parts List Manual

Performance Charts

Performance Performance
To find the fluid pressure (psi/bar/MPa) at a specific
fluid flow (gpm/lpm) and percentage of maximum
force:
1. Locate the desired fluid flow in the scale at the
bottom of the chart.
2. Follow the vertical line up to the intersection with
the selected percentage of maximum force (see
Key below).
the Key Key
3. Follow left to the vertical scale to read the fluid
outlet pressure.
Table 2 2 2 . . . Models Table Table Models EC11xx Models EC11xx and EC11xx
FLUID FLUID FLUID PRESSURE: PRESSURE: PRESSURE:
psi (bar, MPa)
3A2096D
Charts
Charts
and EC12xx and EC12xx (750 EC12xx (750 cc cc cc lower, (750 lower, 1 1 1 HP lower,
NOTE: The shaded area within the table shows the recommended range for continuous duty circulation NOTE: NOTE:
applications.
Key to to to Performance Key Key Performance Performance Charts Charts Charts
NOTE: The charts show the motor operating at NOTE: NOTE:
100%, 70%, and 40% of maximum force. These
values are approximately equivalent to an air motor
operating at 100, 70, and 40 psi.
100% of maximum force
70% of maximum force
40% of maximum force
HP motor, HP motor, 1400 motor, 1400 lb lb lb maximum 1400 maximum force) maximum
CYCLES CYCLES PER CYCLES PER MINUTE PER MINUTE MINUTE
FLUID FLUID FLUID FLOW: FLOW: FLOW: gpm (lpm)
Performance Charts
force) force)
25