Wiring Connection - Kenwood KDC-315R Instruction Manual

Wiring connection

For KDC-3051R/ KDC-3051G/ KDC-315A/ KDC-315R/ KDC-3251RY
KDC-3051R/ KDC-3051G/
KDC-315A/ KDC-315R
Rear/subwoofer
output terminals
Light blue/yellow
(Steering remote control wire)
Blue/White
(Power control/motor antenna
control wire)
Brown
(Mute control wire)
Yellow (Battery wire)
Red (Ignition wire)
Red (A7)
Yellow (A4)
ISO connectors
Pin Color and function
A4 Yellow Battery
A5 Blue/White Power control
A7 Red Ignition (ACC)
A8 Black Earth (ground) connection
KDC-3251RY
Front output terminals
Rear/subwoofer output terminals
Antenna terminal (JASO)
KDC-3051R/ KDC-3051G/ KDC-315A/ KDC-315R: To the
steering wheel remote control adapter (optional accessory)
To the power control terminal when using the optional power
amplifier, or to the antenna control terminal in the vehicle.
To the terminal that is grounded when either the telephone rings
or during conversation. (To connect the Kenwood navigation
system, consult your navigation manual.)
Connecting the ISO connectors on some VW/Audi or
Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied
wiring harness as illustrated below.
Ignition wire
Unit
Battery wire
Pin
B1 / B2 Purple
B3 / B4 Gray
B5 / B6 White
B7 / B8 Green
(Red)
(Yellow)
Default wiring
Color and function
ª ·
/ Purple/black Rear speaker (right)
ª ·
/ Gray/black Front speaker (right)
ª ·
/ White/black Front speaker (left)
ª / Green/black · Rear speaker (left)
Fuse (10 A)
A7 (Red)
Vehicle
A4 (Yellow)
13