Other Features; Audio Control Setting; Table Of Audio Control Setting - Kenwood KDC-6060R Instruction Manual

Other features

(See page 8)

Audio Control Setting

Adjust various parameters of sound quality.
1
Press the AUDIO button to enter the control mode.
2
Press either the FM or AM button.
Each time the button is pressed, the adjustment mode will
change as follows:
Pressing the FM button advances the display, and pressing the
AM button reverses it.
Bass
Treble
Balance
Fader
NOTE
Source tone memory
Each source (CD, FM, AM, and disc changer) has its own
memory in which to store the bass and treble tone settings.
The settings made for a particular source are then recalled
automatically whenever you use that source (e.g., FM mode uses
the tone settings made for FM, AM for AM, etc.).
3 Press the 4/¢ button.
Look at the table to adjust the mode being displayed.
4
Press the AUDIO button to end the control mode.

Table of Audio Control Setting

Adjustment
mode
4 button
(Display)
Bass
Bass decreased.
("BAS")
Treble
Treble decreased.
("TRE")
Balance Left channel
("BAL") emphasized.
Fader Rear channel
("FAD") increased.
— 30 —
Operation of Audio control button
¢ button
Bass increased.
Treble increased.
Right channel
emphasized.
Front channel
increased.