Playing Other Disc Mode - Kenwood KDC-6060R Instruction Manual

Disc control features
7 When a unit equipped with an O-N switch is to be
connected, please also see the instruction manual of this
unit. Set the O-N switch to "N". "N"-operation will be set.
7 When a unit that is not equipped with an O-N switch, or the
changer switching unit "KCA-S200" is connected, "O"-
operation will be set.
"N"-operation:
• The disc title and track title of the CD text can be displayed.
• The disc name will be displayed when the name has been
registered to any connected unit with the Presetting Disc
Names function, or when the playing unit contains a disc to
which the disc title has been recorded.
"O"-operation:
• CD text cannot be displayed.
• Regardless of the control unit, the characters that can be
registered with the Presetting Disc Names function are "A~Z
0~9 /, +, –, , =, <, >, [ , ]".
• The disc name will be displayed when the name has been
registered to the playing unit with the Presetting Disc Names
function.
NOTE
The CD text, Presetting Disc Names, and Disc Name Preset Play
functions may not be operational depending on the unit.
(See page 7)

Playing Other Disc mode

This function permits the connection of optional players and
the playing of discs other than the loaded CD (in the current
unit).
Playing Discs:
Press the SRC button repeatedly unitl the disc contol node is
obtained.
The disc sill start playing.
NOTE
The disc control mode will differ, depending on the unit that is
connected.
Mode Display Examples)
• DISC"...when a disc changer is connected
• "DISC-1", "DISC-2"...when two disc changers are connected
Pausing and Restarting Disc Play:
Press the 38 button to make the disc pause.
Press the same button again to start play again.
NOTE
• When one disc has finished playing its last track, the next disc
in the changer starts playing. When the last disc in the changer
has finished, the player returns to the first disc and starts
playing it.
• Disc #10 is displayed as "0".
— 22 —