Preset Station Seek With Programme Service Name; Switching Display For Tuner (Non-Rds Station) - Kenwood KDC-6060R Instruction Manual

Function of remote control with DNPP button

Preset station seek with Programme service name

You can search for the preset station with Programme Service
name.
1
Press the DNPP button on the remote control.
"SNP PLAY" will be displayed once the seek mode is entered.
The names of the stations preset in the band currently listened
to are displayed for 5 seconds each.
The display band switches in the following order:
= FM1 Ô FM2 Ô FM3 Ô AM +
Each time you press the ¢ button, the station display
switches in the forward direction.
Each time you press the 4 button, the station display
switches in the reverse direction.
Stations which have no names will be displayed as
frequencies.
NOTE
Changing the Displayed Band
Pressing the FM button switches between the FM1, FM2, FM3
and AM displays, in that order.
Pressing the AM button switches between the displays in the
reverse direction.
2
Once the name is displayed for the station you want to listen
to
Press the OK button.
Reception starts of the displayed station, and the seek mode
ends.
Cancelling mode during input:
Press the DNPP button.
The seek mode is cancelled.
(See page 8)

Switching Display for Tuner (non-RDS station)

Switching the Display:
Each time you press the DISP button, the display switches
between the frequency and Clock.
NOTE
• When the switching clock display (P.32) is set to off, the display
will not switch to the clock display.
• The £ indicator lights whilst the clock is displayed.
— 15 —