Table of Contents
Advertisement
Tuner features
Preset station seek with Programme service
name
You can search for the preset station with Programme Service
name.
1
Press the DNPP button on the remote control.
"SNPP" will be displayed once the seek mode is entered.
The names of the stations preset in the band currently listened
to are displayed for 5 seconds each.
The display band switches in the following order:
= FM1 Ô FM2 Ô FM3 Ô AM +
Each time you press the ¢ button, the station display
switches in the forward direction.
Each time you press the 4 button, the station display
switches in the reverse direction.
Stations which have no names will be displayed as frequencies.
NOTE
Changing the Displayed Band
Pressing the FM button switches between the FM1, FM2, FM3
and AM displays, in that order.
Pressing the AM button switches between the displays in the
reverse direction.
2
Once the name is displayed for the station you want to listen
to
Press the OK button.
Reception starts of the displayed station, and the seek mode
ends.
Cancelling mode during input:
Press the DNPP button.
The seek mode is cancelled.
Clock display
Turning clock display On/Off:
Each time you press the CLK button, the display switches
between the clock and Band/Preset station number display.
NOTE
The £ indicator lights whilst the clock is displayed.
(Function of Remote)
Kenwood intelligent Twin IF (K2I)
When the frequency of another station is too close to that of
the station currently being listened to, interfering with proper
reception, this function automatically narrows the range of
received frequencies to prevent such interference.
— 12 —
Advertisement
Table of Contents
