Table of Contents
Advertisement
SH SOLAR E, D
Maintenance Schedule
6.2
Checking pump oil level
-
Changing pump oil
6.3
Cleaning water fi lter
6.5
Fuel fi lter
6.1 Hour counters
6.2 Oil
PROTECT THE
ENVIRONMENT
24
After the fi rst 50
Weekly
operating hours
HOUR PUMP
0250
HOUR HEATER
0100
PUMP OIL LEVEL
Waste oil and oil sludge must
be removed as laid down in the
instructions.
Every six months
or 500 operating
hours
Your machine features built-in
hour counters that keep track of
the number of working hours on
your machine.
By depressing the red "STOP"
ESC
button (4) and keeping it de-
+
pressed, you will be able to see
-
the number of working hours
on the pump and the heating
OK
system through the inspection
window (10).
Letting go of the "STOP" button
will switch off the hour counter
display again.
Your machine is equipped with
an electronic "oil sensor", which
monitors the level of lubricant
oil in the high pressure pump. If
the oil level (by malfunction or
ESC
excessive wear) should drop to
+
a low level, your machine will
-
stop (or not be able to start)
with an error indication "PUMP
OK
OIL LEVEL" in the inspection
window.
Topping up the oil cup will be
possible with the cabinet re-
moved, but you should send for
a Nilfi sk service technician as
soon as possible to disclose the
cause of the oil loss.
Original Instructions
As required
Advertisement
Table of Contents
