Connecting To External Fuel Supply - D-Models - Nilfisk-Advance SH SOLAR E Instructions For Use Manual

High pressure hot water washer
Table of Contents

Advertisement

3.11 Connecting to external
fuel supply – D-models
Diesel according to EN 590 (up to 7% bio diesel) can be used with the following restrictions:
Maximum storage time in high pressure cleaner diesel tank: 1 month.
Diesel stored externally for more than 6 months is not allowed to be fi lled into Nilfi sk high pressure
washers.
Diesel EN 590 is not recommended for use in HPW's at an ambient temperature below 0°C.
Diesel EN 590 from an open container must not be used.
Original Instructions
a
b
All D- models must be connect-
ed to an external fuel supply
(canister or tank) as no internal
provision is made for storing
fuel.
You can choose between one-
and two-string connection,
where "one"-string only has one
supply hose (a) and "two"-string
has an additional return hose
(b) - see illustration.
Please observe that in some
countries only the "one" string
system is approved.
The fuel hose(s) should be
guided through the rubber
grommet(s) in the chassis of
the machine as shown in the
fi gure and routed securely to
the external fuel supply.
a = Oil in
b = Oil return (only two-string
connection)
Please observe the following
restrictions to fuel line.
SH SOLAR E, D
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sh solar d

Table of Contents