Table of Contents
Advertisement
4.2.4 Double spray lance,
pressure regulation
4.2.5 Stop
Original Instructions
hot water does not have to pass
through the high pressure pump
the maximum temperature can
be as high as 99°C.
If an error occurs to the heating
system of the machine, the ma-
chine stops and the red "STOP"
push button (4) will start fl ash-
ing and the heating source
will be shut off. Press the red
button to re-set the machine.
1
min.
max.
By pushing the green "START"
push button (3), the machine
will continue to be functional
with non heated water.
In this case please refer to sec-
tion "7 Troubleshooting".
The spray lance features 2
nozzles, a high pressure nozzle
and a low pressure nozz le.
High pressure mode
When the pressure reducing
valve (1) is completely closed
(turned clockwise - B), only the
high pressure nozzle is used -
high pressure mode.
Low pressure mode
When the reducing valve (1)
is completely opened (turned
counterclockwise - A), both
spray lances are used - low
pressure mode / possibility of
dosing detergents.
The pres sure may be reg u lat ed
between these positions.
Danger of scalding!
Never detach high pressure
hoses at a water temperature
above 50°C.
Prior to dismounting of the high
pressure hose, the machine
should be cooled down. After
cooling down, stop the machine
and close the shut-off cock.
Never detach the high pressure
hose while the machine is in
operation.
SH SOLAR E, D
17
Advertisement
Table of Contents
