Siemens CP 1626 Operating Instructions Manual page 26

Operating hardware
4.2 Diagnostics with SNMP
SNMP-compliance of a CP 1626
A management agent is integrated in the CP 1626.
The CP 1626 supports the SNMP V1 and SNMP V2 protocols.
In the MIB-II, the CP 1626 contains all groups except "egp and transmission" and "at".
The following SNMP capabilities are supported by the CP 1626:
● LLDP
● MIB II
● MRP
● private MIB
Security concept
Access with SNMP is controlled by the concept of communities.
Access
Read-only access
Read and write access
Meaning of the abbreviations/acronyms and source of further information
In the following table, you can see the meaning of the abbreviations/acronyms used above
and can also see where you can obtain further information.
Abbrevia-
tion/acronym
SNMP
SNMP V2
SMIv1
MIB-II
Private MIB
26
Meaning
Simple Network Management Protocol
Simple Network Management Protocol
Version 2 (administration, protocol opera-
tions and security)
Structure and Identification of Management
Information – Describes the structure of
MIB objects.
Management Information Base, Version 2
MIB with product-specific expansions
Community
public
private
Further information
RFC 1157
RFC 1901 and RFC 1905
RFC 1155
RFC 1213
Section "Private MIB of a CP
1626 (Page 29)"
snpccp1626.mib
Operating Instructions, 11/2018, C79000-G8976-C434-03
CP 1626