Direct Access Tuning; Selecting The Preset Band; Channel Preset Memory; Preset Tuning - Kenwood KOS-A200 Instruction Manual

Direct Access Tuning

Entering the channel and tuning.
1
Enter Direct Access Tuning mode
Press the [DIR] button.
2
Enter the channel
Press the number buttons.
3
Do Channel Search
Press the [4] or [¢] button.
Cancelling Direct Access Tuning
Press the [DIR] button.
• If you make no button operation for 10 seconds, the
Direct Access Tuning mode is automatically canceled.
• You can set up until Channel number 223.
• If there is no signal in the input Channel, "NO CH"
appears. (KTC-SR901: optional accessory)
• You cannot search for a channel number which is not
broadcasting.
(KTC-SR902/KTC-SR903: optional accessory)

Selecting the Preset Band

Press the [5] button.
Each time you press the button, the preset band
alternates between the SR1, SR2, SR3 and SR4.

Channel Preset Memory

Putting the channel in the memory.
1
Select the preset band
Press the [5] button.
2
Select the channel to put in the memory
Press the [4] or [¢] button.
3
Enter memory mode
Press the [MEMORY] button.
"PRESET" is displayed.
4
Select the preset number
Press the desired [1] — [6] button.
5
Put the channel in the memory
Press the [OK] button.
"MEMORY" is displayed.
On each band, you can put 1 channel in the
memory on each [1] — [6] button.
• Only the channel number is stored. Category
information is not stored.

Preset Tuning

Recalling the channels in the memory.
1
Select the preset band
Press the [5] button.
2
Recall the channel
Press the desired [1] — [6] button.
• You cannot search for a channel number which is not
broadcasting.
(KTC-SR902/KTC-SR903: optional accessory)

Channel Scan

Checks every receivable Channel for 10 seconds.
1
Start Channel Scan
Press the [SCAN] button.
"SCN C" is displayed.
2
Release the button when the song you want
to hear is received
Press the [SCAN] button.

Text Scroll

Scrolls the displayed channel name and other
items.
Press the [SCRL] button.
15
|
English