Kenwood KOS-A200 Instruction Manual page 32

External media controller with rds encoder
Hide thumbs Also See for KOS-A200:
Table of Contents

Advertisement

Available languages

Available languages

Troubleshooting Guide
HOLD:
The protective circuit in the unit activates
when the temperature inside the
automatic disc changer exceeds 60°C
(140°F), stopping all operation.
➪ Cool down the unit by opening
the windows or turning on the air
conditioner. As the temperature falls
below 60°C (140°F), the disc will start
playing again.
NA FILE:
An Audio file is played with a format that
this unit can't support.
➪ ----
COPY PRO:
A copy-protected file is played.
➪ ----
NO DVICE:
The USB device is selected as a source
although no USB device is connected.
➪ Change the source to any source other
than USB. Connect an USB device, and
change the source to USB again.
NA DVICE:
An unsupported USB device is connected.
➪ For the supported USB devices, refer to
<About USB device> (page 5).
NO MUSIC/ E-15:
• Media was played that doesn't have data
recorded that the unit can play.
• The connected USB device contains no
playable audio file.
➪ Use media that has data recorded that
the unit can play.
USB ERR:
The connected USB device is rated a
current capacity higher than the allowable
limit.
➪ Check the USB device with reference to
<About USB device> (page 5).
Some trouble may have occurred to the
connected USB device.
➪ Remove the USB device and then
reconnect it. When the same message
displays again, use another USB device.
ANT ERR:
SIRIUS Antenna is not connected.
➪ Make sure the antenna is connected
correctly and then turn ON/OFF of the
unit.
TUN ERR:
Broadcast (SIRIUS) cannot be received due
to an error in this unit.
➪ Turn ON/OFF of the unit.
➪ Make sure the antenna is connected
correctly and then turn ON/OFF of the
unit.
ESN ERR:
ESN (SIRIUS) is not registerd in this unit.
➪ Turn ON/OFF of the unit.
32
|
English

Advertisement

Table of Contents
loading

Table of Contents