Timer Operation - Kenwood XD-8551 Instruction Manual

Timer operation

Operate easy To use Timer (O.T.T.)
Playback of the selected input source starts at the specified time, and the power is switched off after one hour. This timer
operates only once directly after setting.
Sleep timer (SLEEP)
The power is turned OFF automatically after the specified period has elapsed.
Timer playback, timer recording (PROG.1, PROG.2)
With each of the two timer programs, a selected source can be played (or radio broadcast can be recorded) in the previously set
time period.
AI timer playback (PROG.1, PROG.2)
The volume increases gradually until the factory-set level.
Adjust the clock before setting the timer.
Operate easy To use Timer
Timer playback can be set with a simple operation of just setting the time. With this function, the last source selected before
turning power off can be played by the timer. The power turned ON by the timer is switched off automatically in an hour after
the timer playback starts.
1 Select the desired source and adjust
the volume.
2 Press the O.T.T. key.
3 Set the ON time.
4 Press the ENTER key.
5 Switch OFF the power supply.
Sleep timer
(SLEEP)
Set the number of minutes after which the power is to be turned OFF.
1 Turn the power ON.
2 Set the time.
(Operate easy To use Timer : O.T.T.)
O.T.T
UP
C-H6 display
TUNING
RDS EON
DOWN
ENTER
C-H6 display
IT
ALL
AX
SLEEP
Adjust the clock before setting the timer.
The program timer does not operate until O.T.T.
operation has ended.
÷ At the time of tape playback by timer operation, the B deck has priority.
÷ For the systems including the DP-MH5: Timer playback of a CD is
possible only with the CD loaded in tray No. 1.
÷ The input source and ON time are displayed when the O.T.T. key is
pressed.
Each press switches the modes as follows.
1 O.T.T. lit .......... Timer can be used.
2 O.T.T. not lit ... Timer is not used.
TA NEWS INFO. TP PTY TOTAL SPACE
O N * A A M * 7 3 : )
kHz
MHz
EQ.
SLEEP O.T.T. ECHO P.B.C. MANU.
ON
÷ The ON time can be set in steps of 5 minutes.
÷ When the O.T.T. timer is used simultaneously with another timer
function, the last operated input source will be played.
÷ The O.T.T. timer can be set even while the power is OFF.
To cancel
Press the O.T.T key twice.
÷ The power is turned OFF automatically after the set time has elapsed.
÷ Each press decreases the time by 10 minutes. The maximum time that
can be set is 90 minutes.
90=80=70...30=20=10=Cancel=90=80...
Duration for sleep timer
RDS EON TA NEWS INFO. TP PTY TOTAL SPACE
s L E E P * 3 ) 1 : 5
EQ.
SLEEP O.T.T. ECHO P.B.C. MANU.
ON
Lights
To cancel
Turn the power OFF or press the SLEEP key until the sleep
time is cancelled.
XD SERIES (En/E2)
C-H5 display
IT RDS TA NEWS INFO. TP PTY EON SLEEP
PRO
O N * A A M * 7 3 ) :
ST.
12
UTO
NED
1
6
11
16
C-H5 display
DIT RDS TA NEWS INFO. TP PTY EON
s L E E P * 3 )
ST.
UTO
NED
kH
MH
Duration for sleep timer
65
O.T.T. ECHO
EQ. ON
P.B.C.
MANU
kHz N.B.
MHz
Lights
SLEEP O.T.T. ECHO
EQ. O
; * *
P.B.C.
MANU
kHz N.B.
MHz