Giving Preference To The Tape Length Over The Title Sequence (Time Edit Recording) - Kenwood XD-8551 Instruction Manual

Giving preference to the tape length over the title sequence
(Time edit recording)
When the tape recording time is specified, recording is executed with changing the title sequence so that no title will be
interrupted when the tape direction is changed at the end of one side.
When equalizer, SRS 3D or another effect is applied
to the sound, the sound with the applied effect can
be recorded.
Recording preparations are required. ¤
1
Press so that the "PGM" indicator goes off.
2
Light the "EDIT" indicator.
If more than 8 seconds have elapsed,
select the mode again.
3
Enter the disc and tape conditions.
1 Enter the disc No. (DP-MH5 only)
Go to step 2 within
8 seconds.
2 Press the EDIT key.
(DP-MH5 only)
Go to step 3 within 8 seconds.
3 Enter the recording length of the tape.
4
Start edit recording.
Wait until the "EDIT" indicator stops
blinking, and then press the CCRS key.
O p π
Depending on the combination of conditions from CD contents (number of titles and length of the titles) and tape recording time, interruption
of a title may not be avoidable. In such a case, the respective title will not be recorded.
Note Note
OP
¤ ¤ ¤
¤
For the reverse mode, select """ ,"["(two-way recording).
P.MODE
EDIT
DISC SKIP
1 2 3
4 5 6
46-, 54-, 60- or 90-minute tapes can be selected simply by pressing the
7 8 9
TIME key for the required number of times. (The recording time can be
PTY
adjusted in 1-minute steps with the 4 and ¢ keys.)
SEARCH
After entry, press the EDIT key then proceed to step 4.
0 +10
Blinks
CCRS
For C-H6: Character information indicators cannot be dis-
Note
Note played while the spectrum analyzer display is used. Switch
to the dual display or character display mode to see the
information.
Should be OFF.
PGM MEMO
AUTO DISC
TUNED STEREO
Lights
PGM MEMO EDIT
AUTO DISC
TUNED STEREO
÷ When pressing the EDIT key, "SPACE" indicator also lights up with
"EDIT" indicator. To cancel the auto-space function, press the SPACE
key.
For the systems
PGM MEMO
including DP-H5
AUTO DISC
TUNED STEREO
For the systems
PGM MEMO EDIT
including DP-MH5 SPACE TOTAL
DISC ALL
PROG. 1 2
÷ The recording time is 99 minutes maximum.
÷ Up to 32 tracks can be edited.
÷ CD tracks will be edited automatically onto tape sides A and B. After
editing, the "EDIT" indicator stops blinking and starts to light steadily.
Press the numeric keys as shown below.
30-minute tape : 000)
46-minute tape : 00006
During recording: X-H5
Blinks
CCRS
÷ The tape and CD stop automatically when recording has completed.
Convenient CD recording
XD SERIES (En/E2)
!´
EDIT RDS EON TA NEW
C D *
ALL
MAX
SLEEP O.T.T.
RDS EON TA N
D _ *
ALL
‡q
EDIT RDS EON TA NEWS INFO. TP PTY TOTAL SPACE
D 1 * ) 1 * C - - :
ALL
RDS TA NEWS INFO. TP PTY EON SLEEP O.T.T. ECHO
C D * * * * C - - - ;
ST. P.B.C.
AUTO kHz
TUNED MHz
Lights
REC / ARM
55
-
kHz
MHz
EQ. ON MUT
MANUAL
N.B.