Clock/Timer Operation; Clock Setting; Timer Setting - Kenwood M-616DV Instruction Manual

Clock/timer operation

Clock setting

1
Press CLOCK/TIMER button.
"SETCLOCK" appears and "CLOCK" starts flashing.
2
Press ENTER button.
The hour indication starts flashing.
3
Press 4 or ¢ button to set the hours and
press ENTER button.
The minute indication starts flashing.
4
Press 4 or ¢ button to set the minutes and
press ENTER button.
⁄
• The clock setting will be erased when the power cord is
disconnected or a power failure occurred.
26
M-616DV

Timer setting

The system can switch on to DVD, USB, TUNER or iPod
automatically at a preset time, serving as an alarm to
wake you up.
Important!
Before setting the timer, ensure that the clock is
set correctly.
1
Press CLOCK/TIMER button repeatedly to select
"SETTIMER" and press ENTER button.
"ON TIME" is flashing.
2
Press ENTER button to set the time for on time.
The hour indication starts flashing.
3 Press ¢ or 4 button to set the hours and
press ENTER button.
The minute indication starts flashing.
4 Press ¢ or 4 button to set the minutes and
press ENTER button.
"ON TIME" is flashing.
5
Press ¢ or 4 button to select "OFF TIME"
and press ENTER button.
"OFF TIME" is flashing.
6
Repeat the steps 3 and 4 to set the off time.
The icon " " appears.
7
Press ¢ or 4 button to select "SOURCE"
and press ENTER button.
"SOURCE" is flashing.
8
Press INPUT SELECTOR button or CD/DVD
6,
iPod/iPhone USB
button to select the desired source and press
ENTER button.
The source switches as follows :
"TUNER" = "DISC" = "USB" = "IPOD" = "TUNER"
=...
When TUNER is selected, select the preset station
number after the above.
6,
6, or 6
TUNER/AUX