Twin Recording - Kenwood XD-8551 Instruction Manual

58

Twin recording

This function allows to record CD sound simultaneously
on a tape and MD. All tracks on a CD can be recorded in the
same order as they are recorded on the CD.
When recording sound from the MD recorder to a cassette
deck, be sure to read the instruction manual of the optional
MD recorder (DM-F70).
Recording preparations are required. ¤
1
Press so that the "PGM" indicator goes off.
2
Select the disc.
Go to step 3 before playback starts.
3
Start edit recording.
To end recording in the middle
÷ Both the cassette deck and CD player stop.
1. When the TWIN REC key is pressed during playback of CD, the playback stops and the CCRS setting (preparing edited recording) starts.
2. The automatic recording level setting in the edit recording is based on a suitable section for recording level setting in the loaded CD.
Notes Notes
3. If the deck is set for one-side recording ("), the processing at the tape end is applied only on side A.
(For the systems including DP-MH5)
¤ ¤ ¤
¤
For the reverse mode, select """ ,"["(two-way recording).
P.MODE
DISC SKIP
TWIN REC
7
For the systems including the DP-MH5
Should be OFF.
PGM MEMO
AUTO DISC
TUNED STEREO
÷ The recording input of the MD recorder is set automatically to "DIGITAL".
Selected disc No.
PGM MEMO EDIT RDS EON TA NEWS
D 1 *
AUTO DISC ALL
TUNED STEREO
MAX
SLEEP O.T.T.
During recording: X-H5
Blinks
CCRS
÷ The recording level and bias will be adjusted automatically in approx. 60
seconds (variable depending on CD contents), after which recording
starts.
÷ The CD tracks are recorded in the order they are recorded on the CD.
÷ The tape and CD stop automatically when recording has completed.
Convenient CD recording
XD SERIES (En/E2)
EDIT RDS EON TA NEW
C D *
ALL
MAX
SLEEP O.T.T.
INFO. TP PTY TOTAL SPACE PROG. MUTE
) 1 * * ) ) : 2
12
3
kHz 2
1
MHz
7 8
6
11 12 13
EQ.
ECHO P.B.C. MANU.
16 17
18
ON
Lights
REC / ARM
N.B.
5
4
9 10
14 15
19
20