One-Touch Recording Of An Entire Cd; (One Touch Edit - Kenwood XD-8551 Instruction Manual

52

One-touch recording of an entire CD

When the O.T.E. key is pressed while the CD player is in the stop mode, recording of a CD can be started at the same time as
playback.
When recording sound from the MD recorder to a cassette deck, be sure to read the instruction manual of the optional MD
recorder (DM-F70).
When equalizer or another effect is applied to the
sound, the sound with the applied effect can be re-
corded.
1
Preparation
1 Load a cassette tape in deck B.
2 Select the tape transport direction (2 or 3).
3 Select ""","[" (two-side recording).
4 Select the Dolby NR mode.
5 Select the "CD" input.
6 Insert disc(s) in the CD player.
If your system includes the DP-H5, skip to step 3 below.
2
Select the disc. (DP-MH5 only)
Go to step 3 before playback starts.
3
Press the O.T.E. key.
To end recording in the middle
÷ Both the cassette deck and CD player stop.
P
¤
DISC SKIP
O.T.E.
MD TAPE CD TAPE
7
(ONE TOUCH EDIT.....recording of all titles)
If you record a CD using the SRS 3D system, it is recom-
mended to use the CCRS.
Note Note
Selected disc (DISC 1)
PGM MEMO EDIT RDS EON TA NEWS INFO.
D 1 * ) 1
AUTO DISC ALL
TUNED STEREO
MAX
SLEEP O.T.T. ECHO
X-H5
MD TAPE
O.T.E.
÷ Recording of CD starts at the same time as playback.
÷ At the end of tape, the music is not recorded on the leader tape portion.
If you do not want any music to be interrupted in the middle, refer to
"Recording" and start recording of side B with the interrupted track.
Convenient CD recording
XD SERIES (En/E2)
TP PTY TOTAL SPACE PROG. MUTE N.B.
* * ) ) : )
12
5
4
kHz 3
1 2
MHz
9 10
7 8
6
11 12 13 14
15
EQ.
P.B.C. MANU. 16 17
18 19
20
ON
Lights
CD TAPE
¤