Cd Single-Track Recording (O.t.e.) (Deck B Only) - Kenwood X-W320 Instruction Manual

During CD playback, any desired track can be selected and recorded with "Single-track recording".
This facility is called the O.T.E. (One Touch Edit) function.
2 0
Please note that the O.T.E. recording is not possible with an LD player.
Preparation
1 Make "Playback (recording) preparation"
2 (Load a disc in the CD player.)
3 Adjust the recording level.

CD single-track recording (O.T.E.) (Deck B only)

1
Play the CD track to be recorded.
2
Press the O.T.E. key.
To stop recording in the middle
!
^
O.T.E.
2 7 3
: Keys and control used in the operations described on this page.
Lights up.
O.T.E.
After the track has been recorded, the cassette deck stops after leaving
a non-recorded blank of 4 seconds. The CD player enters pause mode.
To record another track ... Repeat steps 1 and 2.
Pressing the 7 key of the CD player stops the CD player and the
cassette deck.
Pressing the 7 key of the cassette deck also stops the cassette deck
and CD player.
Synchro playback/recording
X-W320 (En)